FEATURES OF SQUARE GUTTERS
- Attractive rectilinear profile
- Flow capacity in excess of Half Round
- Pre-fitted gutter seal retaining clip system for fast user friendly installation
- Pre-lubricated gutter seals
- Cost effective solution for both new build and refurbishment applications
- Connects to most other metal or plastic systems using our extensive range of adaptors
- System is covered by a BSI Kitemark - no. KM501316
* Covers Black, White and Brown
SQUARE GUTTERS COMPATIBILITY
If you are looking to match up with existing square guttering, perhaps on a neighbouring roof, you should establish the make of that system (it will be written on one, if not all, of the fittings), and check the compatibility chart on our technical page - not all square systems are interchangeable.
Our products are compatible with most systems including Hepworth, Brett Martin and Hunter.
CAPACITY OF SQUARE GUTTERS
The carrying capacity of any gutter system is determined not only by its size, but also by the position of the rainwater downpipes in relation to the gutter and the fall to which it is laid. All gutter systems can actually be fixed level, although we would recommend that a fall of 1:600 is incorporated (this equates to approximately 1 inch in 50 feet, or 2.5cm in 15 metres in metric terms).
Floplast Square Gutter capacity varies between 1.7 litres per second (fixed level with the outlet at one end) and 3.95 litres per second (fixed at 1:350 with a central outlet). Surprisingly this is almost double that flow rate of
Half Round Guttering, and more than ample to cope with the flow from a standard pitch, domestic roof. If you have a very steep pitched roof, or perhaps a much larger than average surface area, we would recommend that you consider fitting either our
Deepflow Gutters or
Ogee Gutters.
The size of the downpipe is irrelevant in terms of the system capacity – provided that they are kept free of leaves and debris our downpipes will always have a far greater flow capacity than the gutters that they serve. Square guttering connects to
65mm Square Downpipe as standard, but it can easily be connected to
68mm round downpipe if required by using the
RDS1 adaptor.
SQUARE GUTTER INSTALLATION GUIDE
For tips and videos on square plastic gutter installation, compatibility and maintenance please visit our Guides and Tips Section.
If you need any other assistance please do not hesitate to contact us.