Catchpit Chamber Set - 600mm Diameter x 1555mm Height For 160mm/225mm & 300mm Pipe with 110mm/160mm & 225mm Inlets
In stock
Only %1 left
Code
AICCP600B15
This catchpit chamber has a diameter of 600mm and is 1555mm deep. It features a main channel of 160mm/225mm or 300mm and an additional two 110mm/160mm or 225mm twinwall inlets at 90 degrees.
Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.
Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.
KEY FEATURES & BENEFITS OF THIS PRODUCT
- Quick and simple installation
- Arrives factory assembled in one piece
- Design life of 60 years
- Lightweight and requires no specialist equipment to lift
- Compatible with most pipe systems
- Granular backfill
- Complies with EN 13598-2 (2009), SfA7 and Building Regulations Part H1
- 2x 110mm/160mm or 225mm twinwall inlets
To view Turtle's installation guide for inspection chambers, click here.
