FloPlast Solvent Weld Soil Access Bend - 92.5 Degree x 110mm Olive Grey

Soil access bends are used to change the direction of a PVC soil pipe whilst allowing access into the pipe from both directions for inspection and cleaning. Most commonly used in a horizontal plane, the 92.5 angle gives a slight fall which creates a self-cleansing flow within the soil pipe.

To use the access point, simply remove the access cap by unscrewing it from the threaded projection on the bend. This may release any blockage so it is always advisable to stand aside at this point!

This bend has a solvent socket on each end to connect to a plain ended pipe or to the spigot (plain end) of another fitting.

This solvent weld PVC soil access bend is available in black and olive grey.